Vai al contenuto

Skunk Works ... 75° compleanno ...


TT-1 Pinto

Messaggi raccomandati

Skunk Works ... alle origini del programma JSF ...

In 1986, a team of Lockheed engineers at the Skunk Works gathered around a board to invent what became the F-35 Lightning II.
At the time, of course, these engineers had no idea that the fruit of their brainstorming would lead to a contract award 15 years later for the most expensive weapons system in history.
Back then, their brief from the US Defense Advanced Research Projects Agency looked to be impossible.
For decades, militaries across the globe had ambitions to develop a fighter that could operate without a runway.
The only viable contender to emerge was the British Aerospace Harrier, later adapted for the US market in collaboration with McDonnell Douglas.
But DARPA had raised the bar: could the Skunk Works design a vertical/short take-off and landing fighter that was as fast as an F-16 and as stealthy as an F-117?
Despite several attempts, nobody had developed a supersonic contender, much less one that was also invisible to radar.
But DARPA had come to the right place.
In keeping with Skunk Works tradition, the team led by Paul Bevilacqua took a lateral approach to solving the problem.
As recounted in a 2009 paper by Bevilacqua in the Journal of Aircraft, the team used a design method known as forced associations (*).
(*) ... la relazione dell' Ing. Bevilacqua (sotto forma di PDF che, purtroppo, non sono in grado di linkare) è reperibile in ... http://www.f-16.net/ ... scrivendo nella finestra di ricerca Genesis of the F-35 Joint Strike Fighter ...
Link al commento
Condividi su altri siti

  • 3 anni dopo...

Agli Skunk Works non mancherà il lavoro ...

Quote

Lockheed Martin’s Skunk Works advanced development division opened a new 215,000-square foot production facility Aug. 10, allowing reporters and visitors a glimpse inside the state-of-the-art factory before it begins production of classified systems and is likely permanently closed to non-cleared personnel.
What will be built here first is a secret, but Skunk Works Vice President and General Manager Jeff Babione said he anticipates the facility - at the Air Force’s sprawling Plant 42 complex - will build fighters; intelligence, surveillance and reconnaissance aircraft; hypersonic missiles; and other advanced projects, with possibly more than one project in series production at a time. 
He declined to say specifically whether Lockheed will build Next-Generation Air Dominance fighters at the plant.

... airforcemag.com ... https://www.airforcemag.com/new-skunk-works-plant-to-build-advanced-fighters-other-projects/ ...

Anche qui ... news.lockheedmartin.com ... https://news.lockheedmartin.com/2021-08-10-Lockheed-Martin-Unveils-Intelligent,-Flexible-Factory-at-the-Skunk-Works-R-in-Palmdale,-California ...

🇺🇸

Link al commento
Condividi su altri siti

  • 7 mesi dopo...

Skunk Works ... Jeff Babione se ne va e arriva il suo successore ...

Cita

Lockheed Martin announced today that John Clark has been named the vice president and general manager of Advanced Development Programs (ADP) – also known as Skunk Works® – succeeding Jeff Babione who will retire at the end of the month. 
This change is effective April 4. 
"John's extensive experience in engineering and his previous Skunk Works assignments uniquely qualifies and positions him to step in and lead this team as they continue to build on the innovative legacy the Skunk Works are known for," said Greg Ulmer, executive vice president, Lockheed Martin Aeronautics. 
"He is focused on building customer relationships and collaboration across the business to bring the best of Lockheed Martin to address the rapidly evolving threat environment."

... news.lockheedmartin.com ... https://news.lockheedmartin.com/2022-03-14-Lockheed-Martin-Announces-New-Skunk-Works-R-Leader ...

Anche qui ... aviationtoday.com ... https://www.aviationtoday.com/2022/03/16/lockheed-martin-skunk-works-get-new-chief/ ...

🇺🇸

Link al commento
Condividi su altri siti

Crea un account o accedi per lasciare un commento

Devi essere un membro per lasciare un commento

Crea un account

Iscriviti per un nuovo account nella nostra community. È facile!

Registra un nuovo account

Accedi

Sei già registrato? Accedi qui.

Accedi Ora
×
×
  • Crea Nuovo...